<div class="entry-content">
    <div class="jetpack-video-wrapper"><span class="embed-youtube" style="text-align:center; display: block;"><iframe
                class="youtube-player"
                src="https://www.youtube.com/embed/Tfatk7wmnhs?version=3&rel=1&showsearch=0&showinfo=1&iv_load_policy=1&fs=1&hl=en&autohide=2&wmode=transparent"
                allowfullscreen="true"
                style="border: 0px; display: block; margin: 0px; width: 740px; height: 416.418px;"
                sandbox="allow-scripts allow-same-origin allow-popups allow-presentation"
                data-ratio="0.5627272727272727" data-width="1100" data-height="619"></iframe></span>
    </div>
    <div class="blog-content">
        Basics of DC bias effects and derating of multi-layer ceramic capacitors (MLCC). Acquiring impedance vs frequency curves for DC-biased ceramic capacitors via the two-port shunt-through measurement technique.
    </div>
    <div class="blog-content-chapters">
        <div>
            Chapters:
        </div>
        <ul class="chapters-list">
            <li class="chapters-list-item"><span class="chapters-time">00:00</span><span class="chapters-text">Intro</span></li>
            <li class="chapters-list-item"><span class="chapters-time">02:00</span><span class="chapters-text">Interactive Designs</span></li>
            <li class="chapters-list-item"><span class="chapters-time">02:28</span><span class="chapters-text">MLCC Basics</span></li>
            <li class="chapters-list-item"><span class="chapters-time">04:52</span><span class="chapters-text">Derating Basics</span></li>
            <li class="chapters-list-item"><span class="chapters-time">06:41</span><span class="chapters-text">Issues with Derating</span></li>
            <li class="chapters-list-item"><span class="chapters-time">08:23</span><span class="chapters-text">Mitigation</span></li>
            <li class="chapters-list-item"><span class="chapters-time">10:27</span><span class="chapters-text">2-Port Shunt-Thru Measurement</span></li>
            <li class="chapters-list-item"><span class="chapters-time">12:01</span><span class="chapters-text">DC Block & Bias Injector</span></li>
            <li class="chapters-list-item"><span class="chapters-time">14:30</span><span class="chapters-text">Test Board</span></li>
            <li class="chapters-list-item"><span class="chapters-time">15:28</span><span class="chapters-text">Measurement Set-Up</span></li>
            <li class="chapters-list-item"><span class="chapters-time">16:50</span><span class="chapters-text">Bode Analyzer Software Set-Up</span></li>
            <li class="chapters-list-item"><span class="chapters-time">18:36</span><span class="chapters-text">Test Capacitor</span></li>
            <li class="chapters-list-item"><span class="chapters-time">19:27</span><span class="chapters-text">0V DC Bias</span></li>
            <li class="chapters-list-item"><span class="chapters-time">20:52</span><span class="chapters-text">4V DC Bias</span></li>
            <li class="chapters-list-item"><span class="chapters-time">23:12</span><span class="chapters-text">12V DC Bias</span></li>
            <li class="chapters-list-item"><span class="chapters-time">25:06</span><span class="chapters-text">Outro</span></li>
            
    </div>
    <div class="blog-content-links">
        <div>
            Links:
        </div>
        <ul class="links-list">
            <li class="links-list-item"><a href="https://pms67.github.io/">Interactive Designs</a></li>
            <li class="links-list-item"><a href="https://www.youtube.com/watch?v=GjEmwmAI27U&ab_channel=Phil%E2%80%99sLab">2-Port Shunt-Through Measurements</a></li>
            <li class="links-list-item"><a href="https://www.youtube.com/watch?v=Zs3r5XI8FBY&ab_channel=Phil%E2%80%99sLab">Capacitor Measurement and Modelling</a></li>
            <li class="links-list-item"><a href="https://www.youtube.com/watch?v=kUruN6WBgSw&ab_channel=Phil%E2%80%99sLab">Capacitor Hardware Design Basics</a></li>
            
            <li class="links-list-item"><a href="https://fedevel.com/courses/advanced-digital-hardware-design">Advanced Digital Hardware Design course</a></li>
            <li class="links-list-item"><a href="https://fedevel.com/courses/mixed-signal-hardware-design-with-kicad">Mixed-signal Hardware Design course</a></li>
            <li class="links-list-item"><a href="https://fedevel.com/courses">FEDEVEL courses</a></li>
        </ul>
    </div>  
</div>

Ceramic Capacitor DC Bias Effects & Measurement - Phil's Lab #152

<div class="entry-content">
    <div class="jetpack-video-wrapper"><span class="embed-youtube" style="text-align:center; display: block;"><iframe src="https://www.youtube.com/embed/lVyxlw3rixI" class="youtube-player" width="740" height="416.418" frameborder="0" allowfullscreen></iframe></span>
    </div>
    <div class="blog-content">
        Walking through one of the top PCB factories in China.
    </div>

    <div class="blog-content-chapters">
        <div>
            Chapters:
        </div>
        <ul class="chapters-list">
            <li class="chapters-list-item"><span class="chapters-time">00:00</span><span class="chapters-text">What is this video about</span></li>
            <li class="chapters-list-item"><span class="chapters-time">00:16</span><span class="chapters-text">Preparing panel</span></li>
            <li class="chapters-list-item"><span class="chapters-time">01:46</span><span class="chapters-text">Drilling</span></li>
            <li class="chapters-list-item"><span class="chapters-time">03:01</span><span class="chapters-text">Electroless plating</span></li>
            <li class="chapters-list-item"><span class="chapters-time">04:31</span><span class="chapters-text">Cleaning</span></li>
            <li class="chapters-list-item"><span class="chapters-time">06:04</span><span class="chapters-text">Photosensitive layer</span></li>
            <li class="chapters-list-item"><span class="chapters-time">08:54</span><span class="chapters-text">Electroplating</span></li>
            <li class="chapters-list-item"><span class="chapters-time">10:29</span><span class="chapters-text">Etching</span></li>
            <li class="chapters-list-item"><span class="chapters-time">12:36</span><span class="chapters-text">Solder mask</span></li>
            <li class="chapters-list-item"><span class="chapters-time">14:21</span><span class="chapters-text">Silkscreen</span></li>
            <li class="chapters-list-item"><span class="chapters-time">15:08</span><span class="chapters-text">PCB Testing</span></li>
            <li class="chapters-list-item"><span class="chapters-time">16:06</span><span class="chapters-text">Milling</span></li>
            <li class="chapters-list-item"><span class="chapters-time">16:37</span><span class="chapters-text">Inspection and packaging</span></li>
            <li class="chapters-list-item"><span class="chapters-time">17:39</span><span class="chapters-text">Making a multilayer PCB</span></li>
            <li class="chapters-list-item"><span class="chapters-time">20:04</span><span class="chapters-text">Baking PCBs</span></li>
            <li class="chapters-list-item"><span class="chapters-time">22:23</span><span class="chapters-text">X-Ray and alignment</span></li>
            <li class="chapters-list-item"><span class="chapters-time">23:28</span><span class="chapters-text">SMT Board assembly</span></li>
            <li class="chapters-list-item"><span class="chapters-time">26:30</span><span class="chapters-text">Through hole soldering</span></li>
            <li class="chapters-list-item"><span class="chapters-time">28:45</span><span class="chapters-text">Thank you for watching</span></li>
    </div>
    
    <div class="blog-content-links">
        <div>
            Links:
        </div>
        <ul class="links-list">
            <li class="links-list-item"><a href="https://www.pcbway.com/">Recorded in PCBWay</a></li>
            <li class="links-list-item"><a href="https://fedevel.com/courses">FEDEVEL Online courses</a></li>
        </ul>
    </div>  
</div>

Factory Tour in China - How PCB Is Made | PCBWay

<div class="entry-content">
    <div class="jetpack-video-wrapper"><span class="embed-youtube" style="text-align:center; display: block;"><iframe src="https://www.youtube.com/embed/T2WXlEwhI8k" class="youtube-player" width="740" height="416.418" frameborder="0" allowfullscreen></iframe></span>
    </div>
    <div class="blog-content">
        Talking to a chip designer. Thank you very much Atchi Reddy Chavva
    </div>

    <div class="blog-content-chapters">
        <div>
            Chapters:
        </div>
        <ul class="chapters-list">
            <li class="chapters-list-item"><span class="chapters-time">00:00</span><span class="chapters-text">What is this video about</span></li>
            <li class="chapters-list-item"><span class="chapters-time">00:46</span><span class="chapters-text">About Atchi</span></li>
            <li class="chapters-list-item"><span class="chapters-time">02:53</span><span class="chapters-text">What is inside of a chip</span></li>
            <li class="chapters-list-item"><span class="chapters-time">11:28</span><span class="chapters-text">JTAG, testing, software on chip</span></li>
            <li class="chapters-list-item"><span class="chapters-time">19:39</span><span class="chapters-text">What is on silicon and what are the challenges</span></li>
            <li class="chapters-list-item"><span class="chapters-time">32:34</span><span class="chapters-text">How transistors look and how they are connected</span></li>
            <li class="chapters-list-item"><span class="chapters-time">47:07</span><span class="chapters-text">Operating conditions</span></li>
            <li class="chapters-list-item"><span class="chapters-time">53:06</span><span class="chapters-text">ESD</span></li>
            <li class="chapters-list-item"><span class="chapters-time">1:04:38</span><span class="chapters-text">Designing a chip (example)</span></li>
            <li class="chapters-list-item"><span class="chapters-time">1:17:05</span><span class="chapters-text">Autorouting</span></li>
            <li class="chapters-list-item"><span class="chapters-time">1:35:58</span><span class="chapters-text">Moore's Law</span></li>
    </div>
    
    <div class="blog-content-links">
        <div>
            Links:
        </div>
        <ul class="links-list">
            <li class="links-list-item"><a href="https://www.linkedin.com/in/atchireddy-chavva-23726a7/">Atchi's LinkedIn</a></li>
            <li class="links-list-item"><a href="https://fedevel.com/courses">FEDEVEL Online courses</a></li>
        </ul>
    </div>  
</div>

What is Inside of Integrated Circuits? How Are Chips Designed?

<div class="entry-content">
    <div class="jetpack-video-wrapper"><span class="embed-youtube" style="text-align:center; display: block;"><iframe src="https://www.youtube.com/embed/IFLviz722ws" class="youtube-player" width="740" height="416.418" frameborder="0" allowfullscreen></iframe></span>
    </div>

    <div class="blog-content">
        This video tutorial shows how I use micro VIA and  blind VIA in Altium Designer during PCB layout (HDI PCB Technology).
    </div>

    <div class="jetpack-video-wrapper"><span class="embed-youtube" style="text-align:center; display: block;"><iframe src="https://www.youtube.com/embed/OaefGeQrRkA" class="youtube-player" width="740" height="416.418" frameborder="0" allowfullscreen></iframe></span>
    </div>



    <div class="blog-content-text">
       <b><span style="color:#ff0000;">Updated:</span></b> Have a look also on the following video created
            by <a href="http://www.youtube.com/user/elektroniskorg">Elektroniskorg</a>. The video explains how to configure
            Altium Designer Rules for automatic VIA selection during interactive routing. Thank you for a great tutorial.
    </div>

   
    <div class="blog-content-links">
        <div>
            Links:
        </div>
        <ul class="links-list">
            <li class="links-list-item"><a href="http://www.youtube.com/user/elektroniskorg">Elektroniskorg</a></li>
        </ul>
    </div>  
</div>

Altium Designer – Using uVIAs and Buried VIAs in PCB layout

<div class="entry-content">
    <div class="blog-content">
        DDR3 mirroring is a feature of memory controller.<br><br>

        See the following text from <a href="http://www.jedec.org/sites/default/files/docs/4_20_19R20.pdf">DDR3 SDRAM Unbuffered DIMM Design Specification</a> (JEDEC website – Registration is required, page 17).<br><br>

        <i>Following pins are being mirrored: A3<->A4, A5<->A6, A7<->A8, BA0<->BA1.<br><br>

        “Since the cross-wired pins have no secondary functions, there is no problem in normal operation. Any data written is read the same way. There are limitations however. When writing to the internal registers with a “load mode” operation, the specific address is required. This requires the controller to know if the rank is mirrored or not. This requires a few rules. Mirroring is done on 2 rank modules and can only be done on the second rank. There is not a requirement that the second rank be mirrored. There is a bit assignment in the SPD that indicates whether the module has been designed with the mirrored feature or not. See the DDR3 UDIMM SPD specification for these details. The controller must read the SPD and have the capability of de-mirroring the address when accessing the second rank.”</i>
    </div>

    <div class="blog-content-img-wrapper">
        <img src="https://assets.fedevel.com/blog/2019/10/8ea2f-ddr3_mirroring_pcb_layout.jpg" alt="DDR3_mirroring_PCB_layout" />
    </div>

    <div class="blog-content-text">
        To confirm this, have a look on the following pictures from <a href="http://www.jedec.org/sites/default/files/docs/design/DDR3/PC3_12800_UDIMM_V07_RC_B0_20070529.zip">PC3-12800 UDIMM</a> layout where I have selected A8 signal:
    </div>
    <div class="blog-content-img-wrapper">
        <img src="https://assets.fedevel.com/blog/2019/10/b9f76-ddr3_mirroring_top_and_bottom_layout.jpg" alt="DDR3_mirroring_top_and_bottom_layout" />
    </div>
    
    <div class="blog-content-text">
        <i>Details of A8 Top and Bottom Layer:</i>
    </div>
    <div class="blog-content-img-wrapper">
        <img src="https://assets.fedevel.com/blog/2019/10/b37e2-ddr3_mirroring_top_layout1.jpg" alt="DDR3_mirroring_top_layout" />
    </div>
    <div class="blog-content-img-wrapper">
        <img src="https://assets.fedevel.com/blog/2019/10/47294-ddr3_mirroring_bottom_layout.jpg" alt="DDR3_mirroring_bottom_layout" />
    </div>
    
    <div class="blog-content-text">
        <i>Screenshot from schematic for D1 and D9:</i>
    </div>
    <div class="blog-content-img-wrapper">
        <img src="https://assets.fedevel.com/blog/2019/10/9bb0b-ddr3_mirroring_schematic.jpg" alt="DDR3_mirroring_schematic" />
    </div>


    <div class="blog-content-text">
        Components D1 and D9 are listed in the BOM with same part number.
    </div>

   
    <div class="blog-content-links">
        <div>
            Links:
        </div>
        <ul class="links-list">
            <li class="links-list-item"><a href="http://www.jedec.org/sites/default/files/docs/4_20_19R20.pdf">DDR3 SDRAM Unbuffered DIMM Design Specification</a></li>
            <li class="links-list-item"><a href="http://www.jedec.org/sites/default/files/docs/design/DDR3/PC3_12800_UDIMM_V07_RC_B0_20070529.zip">PC3-12800 UDIMM</a></li>
        </ul>
    </div>  
</div>

DDR3 memory mirroring – PCB layout

<div class="entry-content">
    <div class="blog-content">
        The best high speed design tutorial for PCB layout in Altium Designer what I have found. It’s worth to have a look.<br><br>

        <i><b>High-Speed Digital Board Design with Altium Designer</b> by Istvan Nagy, Electronics Design Engineer, Blue Chip Technology. (<a href="https://assets.fedevel.com/blog/downloads/HiSpeedDesignTutorialforAltiumDesigner.pdf" target="_blank">download pdf here</a>)<br><br>

        Picture: A page from the tutorial</i>
    </div>

    <div class="blog-content-img-wrapper">
        <img src="https://assets.fedevel.com/blog/2019/10/0c528-altium_designer_high_speed_tutorial.jpg" alt="altium_designer_high_speed_tutorial" />
    </div>

   
    <div class="blog-content-links">
        <div>
            Links:
        </div>
        <ul class="links-list">
            <li class="links-list-item"><a href="https://assets.fedevel.com/blog/downloads/HiSpeedDesignTutorialforAltiumDesigner.pdf" target="_blank">High-Speed Digital Board Design with Altium Designer - PDF file</a></li>
        </ul>
    </div>  
</div>

| KNOWLEDGE BASE

A rich source of expert knowledge

Altium Designer – High Speed Design Tutorial

Newest Posts

Ceramic Capacitor DC Bias Effects & Measurement - Phil's Lab #152

Factory Tour in China - How PCB Is Made | PCBWay

What is Inside of Integrated Circuits? How Are Chips Designed?

Categories

BUSINESS ADDRESS