Problem with signal Length in xSignals PCB panel
mohsen.ghazvini@gmail.com , 08-29-2018, 03:09 AM
-
robertferanec , 08-30-2018, 01:19 PM
If these signals need to be same length, you probably need to include resistors in all of them (e.g if you have D0 - D7, then you may need resistors in all data lanes, not only in D0 - D3).
So, in reality this is not a problem - just be careful if some groups have resistors and others not and there is relation ship between them.
So, in reality this is not a problem - just be careful if some groups have resistors and others not and there is relation ship between them.
mohsen.ghazvini@gmail.com , 08-31-2018, 10:33 PM
thank you Robert
it's true, But why ÙŽAltium did not consider the series component length.e.g if we want to length match D0-D7 with CLK that may have some additional series/parallel components, In that case, we will have problems. anyway thanks for your reply
it's true, But why ÙŽAltium did not consider the series component length.e.g if we want to length match D0-D7 with CLK that may have some additional series/parallel components, In that case, we will have problems. anyway thanks for your reply
robertferanec , 09-01-2018, 03:33 AM
I guess, it is not so simple to say what will be the exact delay in that specific component - so there is no really way how Altium could calculate the "missing" length. You could maybe somehow use package in length, but that could be confusing (especially for people who will be re-using your components or your designs). Simple way to handle this, is just to be aware of the length in resistors and add this to your calculation of clk length.
Use our interactive Discord forum to reply or ask new questions.