6 Layer Layout VIA Using Problem
FurkanDursun , 08-23-2020, 06:21 PM
Hello Dear Fedevel Family,
I have 6 layer PCB design which includes a lot of interfaces. When I want to use via in my layout, via automatically jump from layer 1 to layer 4. I can't use layer 2 and layer 3. I don't want to use buried and blind VIAs because of price and time. If are there any options, can anyone explain me? I don't know why I don't use layer 2 and layer 3 exactly. Does anyone know why I couldn't use layer 2 and 3?
My stackup and example screen shoot will attach bellow.
@Lakshmi
@robertferanec
@Paul van Avesaath
robertferanec , 08-24-2020, 08:45 AM
It means 1 to 6. You can use any layer between 1 and 6 (including 1 and 6).
FurkanDursun , 08-25-2020, 03:24 PM
Originally posted by
robertferanecIt means 1 to 6. You can use any layer between 1 and 6 (including 1 and 6).
Thank you, Robert, but my question was about " layer 2 and layer 3". I could not use these layers. I checked my rules, my rules are wouldn't allow me routing on layer 2 and layer 3. I don't know why, but I changed rules and now I can use these layers. Do you know why these layers were not let me? Why did rule set as not checked?
robertferanec , 08-28-2020, 05:02 AM
Interesting. I have never used these rules and I have never seen anything to change them. I am not sure what happen in your case. But, you solved it and that is great!
shaik , 08-30-2020, 02:58 PM
This happen for any of the two reasons
1. when layers are defined as planes, then you can't rout on these layers. (check stack-up and define as layers)
2. Check all layers are selected for routing in design rules
Thanks...
Use our interactive
Discord forum to reply or ask new questions.