How to design footprint for RN2483 module.
Naveen G Bhat , 08-30-2018, 12:36 AM
I am using microchips RN2483 Lora module for my one of project,I am attaching the datasheet of RN2483 module, in that data sheet they did not mentioned the pad size, so that i confused how to design the footprint,please help me in this.
Muhmmad Ahsan , 08-30-2018, 12:41 AM
USE this above link you will find your requirement
Thanks
Comments:
Naveen G Bhat, 08-30-2018, 01:20 AM
i referred that, in that module dimension and pad pitch are given, but they did not mentioned the pad dimension like length and width of the each pad.
Muhmmad Ahsan , 08-30-2018, 02:22 AM
They are mention at right hand side with the Heading of Pad Details which is 1.016*1.524
Muhmmad Ahsan , 08-30-2018, 02:25 AM
It is better ,if you have module itself, Make the foot print according to above mention dimension and print out at actual size on paper and place the module on it so you can get better idea
Comments:
Naveen G Bhat, 08-30-2018, 02:33 AM
i got it, i don't have module with me.thank you so much sir.
Muhmmad Ahsan , 08-30-2018, 02:46 AM
if you have still confusion used this below link
To download Library file according to your Tool
To download Library file according to your Tool
Comments:
Naveen G Bhat, 08-30-2018, 03:27 AM
Thank you.
mohsin_qau , 08-30-2018, 05:26 AM
@Page 9.... Irs clearly mention the PAD Size. See the attachment.
Use our interactive Discord forum to reply or ask new questions.